The Sigelei 100W Box Mod is redesigned from the original version and most of the changes start with the new sleek, round edge design on the housing. The 510 threaded pin is also now spring loaded for easy attachment of your tank systems. The spring load system also allows maximum connection between the battery surface and the tank surface. The other design change is the new magnetic battery door closure. No more dealing with screws. The new door is snap on/off.
The Sigelei 100W Plus features a variable wattage between 10W to 100W with a maximum voltage output of 8.5V.
What is new with the Sigelei 100W Plus?
Besides the housing design changes, the new Sigelei 100w uses a 0.15ohm - 3.0 ohm range which is compatible with sub-ohm tanks. This digital mod also features a new auto detection system of your atty surface and adjusts the voltage accordingly. It is packed with two 18650 size batteries and ideally uses a 30 amps battery.
The new OLED display of the Sigelei is protected by a thin layer film. It displays the battery life as well as the current/set wattage effectively. The wattage and voltage is adjusted by the up and down push buttons. It is extremely convenient.
What are the safety features of the Sigelei 100W Plus?
The new Sigelei 100W Plus uses the top technology on protection which includes: Low resistance, short circuit, reverse polarity protection.
What is unique to the Sigelei 100W?
The most unique feature of this device is the outside vent holes on the housing which prevents overheating of your 18650 batteries and allow them to last to their maximum capacity.
Sigelei 100W Plus Dimensions:
This is one of the smallest and most sleek digital mods. Sigelei 100W Plus only measures 2.2" x 4" x 1" and it comes with a nice silicone case. This will fit in your palm and pocket easily.